Companies looking to use the R110PAX4 multi-protocol print engine in their print-and-apply systems in order to comply with the new radio frequency identification (RFID) labeling mandates and initiatives issued by the major retailers in Europe, can rest assured that the investment they make in the technology now will be protected in the future as RFID standards change and new ones emerge.
Printing & Labelling, Thermal Printing, Barcode Printing, Mobile Printing
A label printer is a computer printer that prints on self-adhesive label material and/or card-stock (tags). A label printer with built-in keyboard and display for stand-alone use (not connected to a separate computer) is often called a label maker. Label printers are different from ordinary printers because they need to have special feed mechanisms to handle rolled stock, or tear sheet (fanfold) stock. Label printers have a wide variety of applications, including supply chain management, retail price marking, packaging labels, blood and laboratory specimen marking, and fixed assets management. Label printers use a wide range of label materials, including paper and synthetic polymer ("plastic") materials. Several types of print mechanisms are also used, including laser and impact, but thermal printer mechanisms are probably the most common.
ZEBRA TECHNOLOGIES PREVIEWS R110PAX4 MULTI-PROTOCOL PRINT ENGINE TO MEET GROWING RFID PRINT-AND-APPLY DEMANDS
May 04, 2005 Comments (0)
May 03, 2005 Comments (0)
Paxar Corporation, a leading provider of fully integrated and innovative labelling, merchandising and identification solutions for apparel manufacturers and retailers, announces it will have a permanent stand at the RFID Centre in Bracknell to showcase its M&S RFID application as well as the 9855 RFID printer and other related products.
Apr 25, 2005 Comments (0)
Leading new and refurbished data capture hardware supplier, Ryzex, has recently been appointed as a Zebra ZASP (Zebra Authorised Service Provider), authorised to carry out warranty repairs and service contracts on Zebra barcode label printers.
Apr 06, 2005 Comments (0)
By RFID enabling the entire process from POS to materials sourcing, the industry can strip millions of pounds of cost out of the supply chain.
Mar 31, 2005 Comments (0)
Marks & Spencer has confirmed that it will expand its Radio Frequency Identification (RFID) trial to 53 stores starting in the spring of 2006.
Mar 31, 2005 Comments (0)
AIDC Expert SATO teams up with Vision Group, a leading Auto-ID entreprise.
Mar 24, 2005 Comments (0)
"Tech TV" is the latest innovation from Interactive Business Communications Ltd, the publisher of Manufacturing and Logistics IT and IT Reseller. This exciting development will deliver video interviews, product launches, tutorials, and seminars, among other compelling features direct to your desktop from our studio and on location.
Mar 23, 2005 Comments (0)
Martin-Baker, world leader in aircraft escape systems, has enjoyed a long association with Imaje spanning more than 14 years.
Mar 21, 2005 Comments (0)
Together, SATO and Oracle can provide leading RFID compliance solutions with a complete offering of consulting, services, hardware, and enterprise software.
Feb 18, 2005 Comments (0)
L'Etiquetage Rationnel has been a reseller of the complete SATO product range in the French market for the past 27 years with excellent results, being SATO's largest partner in Europe.
Global enterprises are looking for ways to reduce costs and improve efficiency and accuracy in their supply chains. To remain competitive, distribution centres, manufacturers, and logistics providers must change the way they label and track goods. Success depends on maximizing efficiency throughout all supply chain operations—front to back. Exploiting mobile labelling technology is fundamental to achieving optimal efficiency.
Wireless bar code and radio frequency identification (RFID) label printing is widely recognised by major retailers globally as an essential technology for enhancing store operations. The ability to print real-time information in the aisle, on demand, saves time, effort, and money—creating competitive advantages.
Mobile printing gives users the flexibility to print materials on demand wherever they may be. Seamless mobility can drive new business processes that improve worker productivity, labelling accuracy, and responsiveness to customer needs.
RFID smart label
RFID Smart label printer/encoders use media that has an RFID inlay (chip and antenna combination) embedded within the label material. An RFID encoder inside the printer writes data to the tag by radio frequency transmission. The transmission is focused for the specific location of the tag within the label. Bar codes, text, and graphics are printed as usual. Printable RFID tags contain a low-power integrated circuit (IC) attached to an antenna and are enclosed with protective material (label media) as determined by the application. On-board memory within the IC stores data. The IC then transmits/receives information through the antenna to an external reader, called an interrogator. High frequency (HF) tags use antennas made of a small coil of wires, while ultrahigh frequency (UHF) tags contain dipole antennas with a matching wire loop.
Bar code symbols may be produced in a variety of ways: by direct marking, as with laser etching or with ink jet printing; or, more commonly by imaging or printing the bar code symbol onto a separate label. Precision of bar code printing is critical to the overall success of a bar-coding solution.
On-site printing generally takes place at or near the point of use. The data encoded is usually variable, entered by an operator through a keyboard or downloaded from the host computer. On-site printing most often involves purchasing label-design software as well as printer hardware. Bar code printers come with their own proprietary programming languages that support all the standard symbologies, and they are capable of printing simple data-static or serialized bar code labels on their own.
However, labels that require additional formatted text, graphics, or multiple fields will require a separate label-design software package. Currently, more than 100 packages exist that are designed for a wide range of platforms and have a wider range of features. Once the purview of programmers, label design can now be accomplished by non-programmers via easy-to-use WYSIWYG graphical interfaces.
The most common bar code print technologies for on-site use are:
Direct Thermal — Heating elements in the printhead are selectively heated to form an image made from overlapping dots on a heat-sensitive substrate.
Thermal Transfer — Thermal transfer printing is a digital printing process in which material is applied to paper (or some other material) by melting a coating of ribbon so that it stays glued to the material on which the print is applied. Thermal transfer technology uses much the same type of printhead as direct thermal, except that an intervening ribbon with resin-based or wax-based ink is heated and transfers the image from the ribbon to the substrate. It contrasts with direct thermal printing where no ribbon is present in the process.
Barcode printers with thermal-transfer and direct thermal technology produce accurate, high-quality images with excellent edge definition.
Dot Matrix Impact — A moving printhead, with one or more vertical rows of hammers, produces images by multiple passes over a ribbon. These passes create rows of overlapping dots on the substrate to form an image. Serial dot matrix printers produce images character by character; high-volume dot matrix line printers print an entire line in one pass.
Ink Jet — This technology uses a fixed printhead with a number of tiny orifices that project tiny droplets of ink onto a substrate to form an image made up of overlapping dots. Ink jet printers are used for in-line direct marking on products or containers.
Laser (Xerographic) — The image is formed on an electrostatically charged, photo-conductive drum using a controlled laser beam. The charged areas attract toner particles that are transferred and fused onto the substrate.
Generally speaking, commercial label printers may use flexographic, letterpress, offset lithographic, rotogravure, photocomposition, hot stamping, laser etching, or digital processes to produce a consistently higher-grade label than those labels produced by on-site printers.
If the content of the bar code symbol is known ahead of use, a commercial label supplier is generally the best choice. However, there are tradeoffs. Commercially supplied labels have to be ordered, stocked, and placed in inventory. A business with frequent product line changes and/or label changes will have to weigh its options carefully.